8
bg 6
 
 
Module Links
2
2
Home About Laboratory Dies Manual Cutting Presses Inspection & Certification ODC Tooling.com  Contact

ODC Tooling & Molds


Manual Cutting Presses
 

The patented design of our cutting press is both rugged and ergonomically friendly. The lever action provides instant feedback so that only the required cutting force is used, thereby eliminating over penetration. This action produces exceptional specimens in rubber, plastics or fabric and preserves the dimensional integrity of the test die. Presses are available for immediate shipment from stock.

 

Features

 
  • cast iron construction
  • cutting force up to 10,000 lbs or 4500 kg
  • swing rotation 360 degrees
  • 12” x 9” polypropylene cutting board
  • press weight 100 lbs or 45 kg
  • active press stroke .400” or 10mm
  • maximum press daylight 4.400” or 112mm
  • press daylight infinitely adjustable down to 2.100” or 53mm
  • daylight adjustment knob on top of main guide post

 

 

 


6
1
5
HOME | ABOUT | LABORATORY DIES | MANUAL CUTTING PRESSES | INSPECTION CERTIFICATION | ODCTOOLING.COM | CONTACT | FTP Login
© Copyright 2014 ODC Tooling & Molds. All Rights Reserved. | Content Management Tools by REM Web Solutions
6
-
REQUEST FOR QUOTE PRINTER FRIENDLY VERSION